- Available Capacities
- 6 to 44 tons
6, 8, 10, 12, 14, 16, and 18 ton** modules available in both Heat Pump and Heat Recovery. Connect up to 3 units for system capacities up to 44 tons.
HIGH HEATING PERFORMANCE
With the ability to produce high heating capacity at -13°F (-25°C), our DVM S systems are a smart solution for commercial buildings in areas that experience low outdoor ambient temperature.
LOW AMBIENT COOLING
Compatible with both DVM S Heat Pump and Heat Recovery models, our Low Ambient Cooling Hood provides 100% cooling capacity down to -13°F (-25°C). Advanced integrated logic allows for louver positioning based on outdoor unit high pressure, outdoor ambient temperature, compressor compression ratio, and operating mode.
ULTIMATE ZONING SOLUTION
DVM S systems allow for precise temperature control in multiple zones, providing comfort to a wide range of occupants. Heat Recovery systems add the capability to heat and cool separate zones simultaneously making it a superior choice.
WIDE VARIETY OF INDOOR UNIT OPTIONS
Our indoor units offer superior performance, flexible installation, and ease of operation. These units employ innovative technologies, like our Wind-Free™* Cooling technology, to optimize comfort in any environment. With over 10 different types of indoor units, ranging from 5,000 to 96,000 Btu/h, there are solutions for almost any application.
EXTENDED PIPING LENGTH
DVM S systems offer installation flexibility with extended piping length up to 722 ft., vertical separation up to 361 ft. between the outdoor unit and furthest indoor unit, and 164 ft. between the highest and lowest indoor units.
CONTROL INTEGRATION OPTIONS
A number of control options are available to fit a variety of project needs, from simple local controllers to full central control options. This allows the capability to integrate into any Building Management System (BMS) through BACnet, LonWorks, or Modbus.
ADVANCED COMMISSIONING AND SERVICE
DVM S systems are equipped with a removable EEPROM chip on the main circuit board to store startup information, system settings, serial number, and other field programmed data. This allows for ease of startup, commissioning, product registration, and future service work when using Samsung service software (S-Net Pro2).
Brochures & Literature
|Product Registration Required. |
|The AHRI Certified® mark indicates Samsung's participation in the AHRI Certification program. For verification of individual certified products, go to www.ahridirectory.org.|
|Available for download on the Google™ Play store and App Store®. A network connection is required. Samsung application account is necessary.|
|*The Wind-Free™ unit delivers an air current that is under 0.15 m/s while in Wind-Free™ mode. Air velocity that is below 0.15 m/s is considered “still air” as defined by ASHRAE 55-2013 (American Society of Heating, Refrigerating, and Air-Conditioning Engineers).|
|**18 ton unit available in 460V models only.|
|DVM-Pro design software is available for download at SamsungHVAC.com.|