DVM S Eco
- Available Capacities
- 3 to 5 tons
3, 4, 4.5, and 5 ton 1 Ø non-modular units available in both Heat Pump and Heat Recovery. Connect up to 10 indoor units on a single DVM S Eco system.
HIGH PERFORMANCE HEATING
DVM S Eco Heat Pump systems have heating performance down to -4°F (-20°C) for the 3, 4, and 4.5 ton units and -13°F (-25°C) for the 5 ton unit. All Heat Recovery systems have high heating performance down to -13°F (-25°C).
FLEXIBLE PIPE CONNECTIONS
Refrigerant piping can enter from the front, rear, bottom, or side of the outdoor unit.
ULTIMATE ZONING SOLUTION
Heat Recovery systems can heat and cool separate zones simultaneously to provide comfort to a wide range of occupants. Requires use of HR Changer.
WIDE VARIETY OF INDOOR UNIT OPTIONS
Our indoor units offer superior performance, flexible installation, and ease of operation. These units employ innovative technologies, like our Wind-Free™* Cooling technology, to optimize comfort in any environment. With over 10 different types of indoor units, ranging from 5,000 to 60,000 Btu/h, there are solutions for almost any application.
EXTENDED PIPING LENGTH
DVM S Eco systems offer installation flexibility with maximum piping length up to 492 ft., vertical separation up to 164 ft. between the outdoor unit and lowest indoor unit (when the outdoor unit is above the indoor units), and 131 ft. between the highest and lowest indoor unit (when the outdoor unit is below the indoor units).
CONTROL INTEGRATION OPTIONS
A number of control options are available to fit a variety of project needs, from simple local controllers to full central control options. This allows the capability to integrate into any Building Management System (BMS) through BACnet, LonWorks, or Modbus.
ADVANCED COMMISSIONING AND SERVICE
DVM S Eco systems are equipped with a removable EEPROM chip on the main circuit board to store startup information, system settings, serial number, and other field programmed data. This allows for ease of startup, commissioning, product registration, and future service work when using Samsung service software (S-Net Pro2).
Brochures & Literature
|Product Registration Required. |
|The AHRI Certified® mark indicates Samsung's participation in the AHRI Certification program. For verification of individual certified products, go to www.ahridirectory.org.|
|Available for download on the Google™ Play store and App Store®. A network connection is required. Samsung application account is necessary.|
|*The Wind-Free™ unit delivers an air current that is under 0.15 m/s while in Wind-Free™ mode. Air velocity that is below 0.15 m/s is considered “still air” as defined by ASHRAE 55-2013 (American Society of Heating, Refrigerating, and Air-Conditioning Engineers).|